|本期目录/Table of Contents|

[1]武国庆,薛魁,文千.乙烯原料选择与加工方案优化模拟[J].石化技术与应用,2021,6:443-447.
 WU Guo-qing,XUE Kui,WEN Qian.Ethylene raw material selection and processing scheme optimization and simulation[J].Petrochemical technology & application,2021,6:443-447.
点击复制

乙烯原料选择与加工方案优化模拟(PDF)

《石化技术与应用》[ISSN:1009-0046/CN:62-1138/TQ]

期数:
2021年6期
页码:
443-447
栏目:
出版日期:
2021-11-10

文章信息/Info

Title:
Ethylene raw material selection and processing scheme optimization and simulation
文章编号:
1009-0045(2021)06-0443-05
作者:
武国庆1薛魁2文千1
1.中国石油独山子石化公司 研究院,新疆 独山子 833699;2.中国石油独山子石化公司 乙烯厂,新疆 独山子 833699
Author(s):
WU Guo-qing1XUE Kui2WEN Qian1
(1.Research Institute of Dushanzi Petrochemical Company,PetroChina,Dushanzi 833699,China;2.Ethylene Plant of Dushanzi Petrochemical Company,PetroChina,Dushanzi 833699,China)
关键词:
石脑油加氢尾油芳烃指数裂解乙烯丙烯收率
Keywords:
naphthahydrogenated tail oilaromatic indexpyrolysisethylenepropyleneyield
分类号:
TE 992.2
DOI:
10.19909/j.cnki.ISSN1009-0045.2021.06.0443
文献标识码:
B
摘要:
针对中国石油独山子石化公司100万t/a乙烯裂解装置运行情况,利用SPYRO乙烯裂解模拟软件建立了裂解炉模型,并以此为依据,对原料性价比与装置运行工况进行了模拟。结果表明:当石脑油终馏点由190 ℃提高到195 ℃时,乙烯、丙烯和三烯(乙烯、丙烯和丁二烯)平均收率依次降低0.14%,0.16%,0.35%;当加氢尾油芳烃指数大于13时,模拟乙烯、双烯(乙烯和丙烯)收率降幅增加;随着稳定烃在石脑油中掺炼质量分数增加,二者共裂解协同效应降低,因此,在满足工业生产前提下,尽量选择单独裂解方式。
Abstract:
Targeting at the operation of a 1 Mt/a ethylene cracking unit of Dushanzi Petrochemical Company,PetroChina,the model of cracking furnace was established by SPYRO ethylene cracking simulation software.The cost performance of raw materials and the operating conditions of unit were simulated.The results showed that when the final distillation point of naphtha was increased from 190 ℃ to 195 ℃, the average yields of simulated ethylene, propylene and triene (ethylene,propylene and butadiene)had decreased by 0.14%, 0.16% and 0.35% respectively; the yield declines of simulated ethylene and diene (ethylene and propylene) were increased when the aromatics index of hydrogenated tail oil was more than 13.As the mass fraction of stable hydrocarbon in naphtha feedstock increased,their synergistic effect of co-pyrolysis decreased.Therefore, under the premise of meeting industrial production, separate cracking method should be selected as far as possible.

参考文献/References

[1] 黄贤平,凌泽济,程敏.利用SPYRO软件优化裂解工艺[J].乙烯工业,2004,16(1):37-39.
[2] 王小强,田亮,程中克,等.乙烯裂解炉模拟优化软件现状及其应用[J].石油与天然气化工,2019,48(6):44-48.
[3] 倪卫高.SPYRO在烯烃原料生产方案测算中的应用[J].石油化工技术与经济,2011,27(1):19-22.
[4] 高辉.SPYRO软件在乙烯原料优化中的应用[J].齐鲁石油化工,2014,42(4):259-262.
[5] 蒋明敬.石油质量SPYRO分析[J].乙烯工业,2013,25(2):1-3.
[6] 万书宝,代跃利,张永军,等.炼油厂重质馏分油作蒸汽裂解装置原料的研究[J].石油炼制与化工,2020,51(3):18-20.
[7] 沈卫中.煤油馏分用作乙烯裂解原料的经济性分析[J].广东化工,2020,47(18):9-11.
[8] 胡杰,王松汉.乙烯工艺与原料[M].北京:化学工业出版社,2017:192-193.
相关文献链接:
[1] 涂连涛,张治军,关创,等.炼油厂增产乙烯原料措施及建议[J].石油与天然气化工,2021,50(1):27-33.

备注/Memo

备注/Memo:
收稿日期:2021-05-26;修回日期:2021-09-07
作者简介:武国庆(1985—),男,甘肃兰州人,学士,工程师。主要从事石化资源评价与流程模拟工作,已发表论文 10 余篇。
更新日期/Last Update: 2021-11-10